One L Cold Trap Lid Manufacturer,Supplier and Exporter in India
.jpg)
Product Code : SCL-GLE-10359
The 1L Cold Trap Lid is a laboratory cold-trap accessory used to close and connect a compatible 1L cold-trap body in vacuum-line, solvent recovery, distillation, and vapour-capture setups. It is intended for chemistry labs, research labs, pharmaceutical labs, testing facilities, universities, exporters, and procurement teams.
Product Description
The 1L Cold Trap Lid from Lab Glassware Manufacturer is intended for compatible cold-trap assemblies where a fitted lid is required to support vapour routing and vacuum-line connection. The supplied product name confirms the 1L cold-trap size reference, but the exact lid material and connection format must be confirmed.
A cold-trap lid helps complete the trap assembly by providing a sealing interface and connection points for vapour inlet, outlet, or vacuum-line tubing where applicable. Exact gasket type, port size, stainless-steel or glass construction, clamp style, vacuum rating, coolant compatibility, and included fittings should be verified before catalogue approval.
Key Features
- 1L setup compatibility: intended for a matching 1L cold-trap body.
- Cold-trap assembly component: helps close and connect the trap during vapour-capture workflows.
- Vacuum-line support: suitable for compatible solvent recovery, distillation, and evaporation systems.
- Connection-ready function: may support inlet, outlet, or vacuum ports where verified.
- Capacity reference: 1L refers to the compatible trap setup, not a calibrated measuring capacity.
- Laboratory workflow use: useful in chemistry, QC, research, pharmaceutical, and teaching labs.
- Specification-dependent safety: seal, material, coolant, and vacuum rating must be confirmed before use.
Technical Specifications
|
Specification |
Detail |
|
Product Name |
1L Cold Trap Lid |
|
Primary Keyword |
1L Cold Trap Lid |
|
Secondary / Semantic Keywords |
cold trap lid, laboratory cold trap lid, 1L trap lid, vacuum cold trap accessory, solvent vapour trap lid, cold trap cover, vacuum line lid, distillation cold trap component |
|
Brand / Supplier |
Lab Glassware Manufacturer |
|
Product Category |
General Lab Equipment / Vacuum Accessory / Cold Trap Component |
|
Compatible Capacity |
1L cold-trap setup |
What's Included in the Kit
- 1L Cold Trap Lid
- Seal, gasket, clamp, hose barb, connector, certificate, or packaging
Applications / Uses
- Completing compatible 1L laboratory cold-trap assemblies
- Supporting vapour routing in vacuum-line protection setups
- Use in distillation, solvent recovery, and evaporation workflows
- Reducing vapour carryover when paired with a verified cold-trap system
- Research, pharmaceutical, QC, and testing-lab vacuum setups
- Advanced teaching demonstrations on cold trapping and pump protection
How to Use the 1L Cold Trap Lid
- Confirm that the lid matches the exact 1L cold-trap body.
- Inspect the lid, seal, gasket, ports, and fittings for damage or contamination.
- Clean and dry all sealing surfaces before assembly.
- Place the lid evenly on the compatible trap body.
- Secure the clamp, gasket, or fastening system according to the verified design.
- Connect inlet, outlet, or vacuum lines only to confirmed matching ports.
- Check for leaks before applying coolant or vacuum.
- After use, vent safely, allow warming, disconnect lines, clean, dry, and store the lid.
Safety note: Do not use this lid under vacuum, pressure, cryogenic coolant, corrosive vapours, or hazardous solvent conditions unless the lid material, seal, port fittings, and complete cold-trap assembly are verified for that use.
Care & Maintenance
- Clean the lid and ports after every use to prevent residue buildup.
- Inspect gaskets and seals before each assembly.
- Dry all surfaces before storage to reduce corrosion or contamination risk.
- Remove from service if cracks, dents, leaks, worn seals, or damaged ports appear.
Why Choose Lab Glassware Manufacturer
Lab Glassware Manufacturer manufactures and exports laboratory glassware, scientific laboratory instruments, lab experiment setups, science kits, mathematics kits, didactic models, and STEM models. Its catalogue supports vacuum-related adapters, condensers, stopcocks, flasks, cold-trap components, and general laboratory equipment for education, research, testing, and institutional procurement.
Frequently Asked Questions
What is a 1L Cold Trap Lid used for?
A 1L Cold Trap Lid is used to close and connect a compatible 1L cold-trap body in vacuum-line, vapour-capture, distillation, or solvent recovery setups.
Does the 1L refer to lid capacity?
No. The 1L reference indicates compatibility with a 1L cold-trap setup. The lid itself is not a calibrated measuring vessel.
What material is the lid made from?
The exact material is not confirmed. Add stainless steel, glass, PTFE, or other material claims only after verification.
Can this lid be used under vacuum?
Vacuum suitability is not confirmed. Use only after verifying the lid, seal, ports, fittings, and complete cold-trap assembly rating.
Does it include a gasket or clamp?
Gaskets, clamps, hose fittings, and connectors are not confirmed. List accessories only after checking the supplied configuration.
Can this be used with dry ice or liquid nitrogen?
Coolant compatibility is not confirmed. Use dry ice, liquid nitrogen, or other coolants only after verifying the complete trap design and safety procedure.
For related vacuum and cold-trap setup products, explore glassware adapters, laboratory glass condenser, laboratory glass stopcocks, and general lab equipment.
.jpg)
.jpg)