Laboratory Thermowell Manufacturer,Supplier and Exporter in India
.jpg)
Product Code : SCL-GLE-10354
The Laboratory Thermowell is a protective laboratory fitting used for holding a thermometer or temperature probe inside compatible reaction, heating, distillation, or monitoring assemblies without exposing the sensor directly to the process contents. It is suitable for chemistry labs, research labs, pharmaceutical labs, universities, testing facilities, exporters, and procurement teams.
Product Description
The Thermowell - Various Sizes 2L 5L from Lab Glassware Manufacturer is intended for laboratory setups where controlled temperature monitoring is required in compatible 2L or 5L assemblies. A thermowell helps position a temperature sensor while reducing direct contact between the probe and the sample, vapour, or reaction contents.
Related verified pages on Lab Glassware Manufacturer confirm thermometer-access adapter context, including a borosilicate glass swan-neck adapter with screw thread for a thermometer or hose. The exact thermowell material, probe bore, joint size, immersion length, pressure rating, vacuum suitability, and certificate availability should be confirmed before final catalogue publication.
Key Features
- Temperature-probe protection: helps hold a thermometer or probe in compatible laboratory assemblies.
- 2L and 5L setup options: supplied product data identifies size options for 2L and 5L systems.
- Process monitoring support: useful for reaction, heating, reflux, and distillation workflows.
- Capacity not applicable: a thermowell is a fitting or sleeve, not a liquid-measuring vessel.
- Laboratory assembly compatibility: intended for use with verified flasks, adapters, lids, joints, or reactor assemblies.
- Sensor separation: helps reduce direct exposure of the temperature probe to liquid or vapour where the design permits.
- Specification-dependent use: material, bore, immersion length, sealing method, and pressure/vacuum limits must be verified.
Technical Specifications
|
Specification |
Detail |
|
Product Name |
Thermowell - Various Sizes 2L 5L |
|
Primary Keyword |
Laboratory Thermowell |
|
Secondary / Semantic Keywords |
glass thermowell, thermometer well, temperature probe sleeve, lab thermowell, reaction flask thermowell, 2L thermowell, 5L thermowell, thermometer adapter |
|
Brand / Supplier |
Lab Glassware Manufacturer |
|
Product Category |
Laboratory Glassware / Temperature Monitoring Accessory / Thermowell |
|
Capacity |
Not applicable; intended for compatible 2L and 5L assemblies |
|
Size Options |
2L and 5L setup compatibility |
|
Intended Users |
Universities, chemistry labs, organic synthesis labs, pharmaceutical labs, research labs, QC labs, testing labs, exporters, distributors, and procurement teams |
What's Included in the Kit
- Laboratory Thermowell for 2L or 5L compatible setup
- Seal, cap, compression fitting, thermometer adapter, certificate, or packaging
Applications / Uses
- Holding temperature probes in compatible reaction assemblies
- Temperature monitoring during heating, reflux, distillation, or solvent recovery
- Protecting probes from direct contact with reaction contents where design permits
- Supporting 2L and 5L laboratory glassware or reactor setups
- Teaching temperature-control principles in advanced chemistry labs
- Research, pharmaceutical, QC, testing, and preparation-room workflows
How to Use the Thermowell - Various Sizes 2L 5L
- Select the thermowell size that matches the 2L or 5L assembly.
- Confirm the thermowell connection type, probe diameter, and required immersion length.
- Inspect the thermowell for cracks, chips, blockage, residue, thread damage, or seal wear.
- Clean and dry the thermowell before inserting the temperature probe.
- Fit the thermowell into the compatible lid, adapter, joint, or reactor opening.
- Insert the thermometer or probe gently without forcing it against the closed end.
- Secure the assembly before heating, stirring, refluxing, or monitoring.
- After use, allow cooling, remove the probe, clean, dry, and store the thermowell safely.
Safety note: Do not use the thermowell under pressure, vacuum, rapid heating, corrosive vapours, or hazardous chemical conditions unless the material, seal, connection, and complete apparatus rating are verified. Use eye protection, gloves, clamps, and a fume hood where required.
Care & Maintenance
- Clean immediately after use to prevent residue or crystallized deposits inside the well.
- Inspect the closed end, connection area, and seal before each use.
- Store in padded storage to prevent breakage, bending, or bore damage.
- Remove from service if cracks, leaks, blocked bore, seal failure, or visible stress marks appear.
Why Choose Lab Glassware Manufacturer
Lab Glassware Manufacturer manufactures and exports laboratory glassware, scientific laboratory instruments, lab experiment setups, science kits, didactic models, and STEM learning products. The brand supplies adapter, flask, condenser, jointed glassware, thermometer-access, and general lab equipment ranges for educational and professional laboratories. Its catalogue supports schools, colleges, universities, testing laboratories, distributors, and institutional procurement projects.
Frequently Asked Questions
What is a Laboratory Thermowell used for?
A Laboratory Thermowell is used to hold and protect a thermometer or temperature probe in compatible reaction, heating, reflux, or monitoring assemblies.
What sizes are available?
The supplied product name identifies 2L and 5L size options. Confirm the exact assembly fit, probe bore, and immersion length before ordering.
Is this thermowell made from borosilicate glass?
The exact material is not confirmed for this item. Add borosilicate glass, stainless steel, PTFE, or other material claims only after verification.
Can it be used under vacuum or pressure?
Vacuum and pressure suitability are not confirmed. Use only after verifying the thermowell material, seal, connection type, and complete apparatus rating.
Does the thermowell include a temperature probe?
A probe is not confirmed as included. List thermometers, probes, seals, or fittings only after checking the supplied configuration.
Can it be used in schools and universities?
Yes. It is suitable for supervised advanced teaching and laboratory demonstrations when matched with compatible apparatus and handled under lab safety procedures.
For related temperature-monitoring and glassware setup products, explore Adapter Swan Neck, glassware adapters, glass flask products, and general lab equipment.
.jpg)