One Neck Receiving Flask Round Bottom Manufacturer,Supplier and Exporter in India
.png)
Product Code : SCL-GF-10348
The 1000mL Receiving Flask 24/40 is a round-bottom laboratory flask used for collecting condensate, receiving solvent fractions, and connecting compatible distillation, reflux, transfer, or recovery assemblies. This 1L single-neck flask is specified with one 24/40 joint for compatible laboratory glassware connections.
Product Description
The 1000mL Round Bottom Receiving Flask - 1 neck 24/40 from Lab Glassware Manufacturer is intended for laboratory setups where a single receiving vessel is required below a condenser, adapter, distillation head, or transfer line. The product name confirms the 1000mL capacity, round-bottom form, one-neck configuration, and 24/40 joint reference.
A 1000mL receiving flask is useful for small-to-medium distillation, condensate collection, solvent recovery, and compatible transfer workflows. Related single-neck round-bottom flask listings reference borosilicate heat-resistant glass, but exact product code, wall thickness, joint angle, vacuum suitability, and certificate status should be confirmed before final catalogue publication.
Key Features
- 1000mL / 1L capacity: suitable for small-to-medium receiving and condensate collection work.
- Single-neck design: provides a direct connection point for compatible receiver assemblies.
- 24/40 joint reference: intended for matching 24/40 laboratory ground-glass connections.
- Round-bottom form: suitable for supported laboratory receiving and recovery setups.
- Receiving-flask function: useful for distillation receiving, solvent recovery, and liquid collection.
- Compatible apparatus use: works with verified condensers, adapters, clips, supports, and receiver connections.
- Specification-dependent operation: material, heat limit, vacuum rating, and chemical compatibility must be confirmed.
Technical Specifications
|
Specification |
Detail |
|
Product Name |
1000mL Round Bottom Receiving Flask - 1 neck 24/40 |
|
Primary Keyword |
1000mL Receiving Flask 24/40 |
|
Secondary / Semantic Keywords |
1L receiving flask, round bottom receiving flask, single neck receiving flask, 24/40 receiving flask, distillation receiving flask, solvent recovery flask, laboratory receiver flask, 1000mL round bottom flask |
|
Brand / Supplier |
Lab Glassware Manufacturer |
|
Product Category |
Laboratory Glassware / Glass Flask / Round Bottom Receiving Flask |
|
Capacity |
1000mL / 1L |
|
Neck Configuration |
1 neck |
|
Joint Size |
24/40 |
|
Shape |
Round bottom |
|
Use Type |
Receiving, condensate collection, distillation, reflux, transfer, and solvent-recovery assemblies |
|
Material / Glass Type |
Borosilicate heat-resistant glass referenced for related single-neck round-bottom flask range |
|
Intended Users |
Universities, chemistry labs, organic chemistry labs, research labs, pharmaceutical labs, testing labs, exporters, distributors, and procurement teams |
What's Included in the Kit
- 1000mL / 1L Round Bottom Receiving Flask with 1 × 24/40 neck
- Stopper, joint clip, receiver adapter, certificate, protective packaging, or accessories
Applications / Uses
- Receiving condensate from compatible distillation assemblies
- Collecting solvent fractions during laboratory recovery workflows
- Connecting to condensers, adapters, or transfer lines with compatible 24/40 joints
- Supporting reflux, collection, and receiver setups in chemistry laboratories
- Teaching jointed-glassware receiving principles in advanced lab courses
- Research, pharmaceutical, testing, and preparation-room workflows
How to Use the 1000mL Round Bottom Receiving Flask
- Confirm that the 1000mL capacity and 24/40 joint match the planned glassware assembly.
- Inspect the flask for cracks, chips, scratched joints, contamination, or stress marks.
- Clean and dry the 24/40 joint before connecting it to adapters or condensers.
- Support the round-bottom flask with a suitable receiver cradle, clamp, or flask support.
- Connect only compatible 24/40 jointed glassware and secure the joint where required.
- Keep receiving volume within the safe working level defined by the laboratory method.
- Use vacuum, heat, cooling, or solvent-transfer conditions only within verified apparatus limits.
- After use, vent safely, allow cooling, disconnect accessories, clean, dry, and store the flask.
Safety note: Do not use this receiving flask under vacuum, pressure, rapid heating, rapid cooling, corrosive vapours, or hazardous solvent conditions unless the glass type, wall thickness, joint fit, and complete apparatus rating are verified. Use eye protection, gloves, clamps, and a fume hood where required.
Care & Maintenance
- Clean after use with a method compatible with the verified glass type and residue.
- Rinse the 24/40 joint thoroughly to prevent sticking and contamination.
- Store supported in padded glassware storage to protect the bulb and neck.
- Remove from service if cracks, chips, leaks, scratched joints, or stress marks appear.
Why Choose Lab Glassware Manufacturer
Lab Glassware Manufacturer manufactures and exports laboratory glassware, scientific laboratory instruments, lab experiment setups, science kits, didactic models, and STEM learning products. The brand serves schools, colleges, universities, laboratories, exporters, and institutional procurement buyers. Its product catalogue supports chemistry, biology, physics, laboratory glassware supply, and education-focused scientific experimentation.
Frequently Asked Questions
What is a 1000mL Receiving Flask 24/40 used for?
A 1000mL Receiving Flask 24/40 is used for collecting condensate, receiving solvent fractions, and connecting compatible distillation, reflux, transfer, and recovery assemblies.
What does 1000mL / 1L mean?
1000mL and 1L refer to the same nominal capacity. The flask is intended for small-to-medium receiving and collection workflows.
What does 24/40 mean on this flask?
24/40 is the confirmed ground-glass joint reference. It should be connected only to compatible 24/40 laboratory glassware joints.
Is this flask made from borosilicate glass?
Related single-neck round-bottom flask listings reference borosilicate heat-resistant glass. Confirm the exact glass grade for this 1000mL receiving flask before final specification use.
Can this flask be used under vacuum?
Vacuum suitability is not confirmed. Use under vacuum only if the flask, joint, wall thickness, and complete apparatus are rated for that condition.
Does this flask include a stopper or adapter?
Stopper, adapter, joint clip, certificate, and accessories are not confirmed. List accessories only after checking the supplied configuration.
For related receiving-flask and jointed-glassware products, explore glass flask products, round bottom flask listings, glass joints, and glass condenser products.
