Angled Cold Trap Manufacturer,Supplier and Exporter in India

Product Code : SCL-GC-10327

The N4 Angled Cold Trap is a laboratory glassware component used for trapping condensable vapours before they pass into a vacuum line, pump, receiver, or downstream apparatus. This angled cold trap is specified with a 34/45 joint for compatible laboratory glassware assemblies.

Product Description

The N4 Angled Cold Trap - 34/45 from Lab Glassware Manufacturer is intended for compatible distillation, solvent-recovery, vacuum-line, and vapour-condensation setups. The confirmed product data identifies the item as an N4 angled cold trap with a 34/45 joint reference.

An angled cold trap is useful where vapours must be condensed or intercepted before reaching sensitive equipment. It is commonly integrated between a vapour source and a receiver, vacuum line, or pump protection path when the full apparatus is properly supported and rated. Exact glass type, trap volume, coolant compatibility, angle geometry, vacuum suitability, and certification status should be confirmed before final catalogue publication.

Key Features

• N4 cold-trap format: supplied with the listed N4 angled cold-trap design reference.
• 34/45 joint: intended for connection with compatible 34/45 jointed laboratory glassware.
• Angled design: supports compact glassware routing where the apparatus layout requires an angled trap path.
• Capacity not applicable: this is a trapping and connection component, not a volumetric measuring vessel.
• Vapour-trapping function: helps intercept condensable vapours in compatible vacuum or distillation systems.
• Equipment protection role: can help reduce vapour carryover to downstream apparatus when used correctly.
• Specification-dependent use: vacuum, coolant, chemical, and thermal compatibility must be verified before operation.

Technical Specifications

What's Included in the Kit

• N4 Angled Cold Trap with 34/45 joint
• Joint clips, adapters, hose connectors, receiver flask, storage case, or certificate

Applications / Uses

• Trapping condensable vapours in compatible laboratory assemblies
• Supporting distillation, solvent-recovery, and vapour-transfer workflows
• Protecting compatible vacuum lines or downstream apparatus from vapour carryover
• Connecting 34/45 jointed glassware in research and teaching laboratories
• Demonstrating vapour condensation and cold-trap principles in advanced chemistry labs
• Use in pharmaceutical, testing, research, and preparation-room glassware systems

How to Use the N4 Angled Cold Trap

• Confirm that the 34/45 joint matches the connected glassware assembly.
• Inspect the cold trap for cracks, chips, scratched joints, leaks, or contamination before use.
• Clean and dry all mating joints before assembly.
• Position the cold trap in the correct flow direction required by the method.
• Secure the complete apparatus with suitable stands, clamps, and joint clips.
• Add only a verified compatible coolant after confirming the trap design and temperature limits.
• Apply vacuum, pressure, heat, or hazardous vapours only within verified system ratings.
• Allow the trap to warm safely before opening, draining, cleaning, or disassembly.

Safety note: Do not use this cold trap with vacuum, cryogenic coolant, hazardous solvents, corrosive vapours, or rapid temperature changes unless the glass type, wall thickness, joints, coolant compatibility, and complete apparatus rating are verified. Use eye protection, gloves, clamps, and a fume hood where required.

Care & Maintenance

• Clean after use with a method suitable for the verified glass material and residue.
• Warm gradually before cleaning if the trap has been used with low-temperature coolant.
• Store in padded glassware storage to protect the angled body and 34/45 joint.
• Remove from service if cracks, chips, leaks, or visible stress marks appear.

Why Choose Lab Glassware Manufacturer

Lab Glassware Manufacturer manufactures and exports laboratory glassware, scientific laboratory instruments, lab experiment setups, science kits, didactic models, and STEM learning products. The brand serves schools, colleges, universities, laboratories, exporters, and institutional procurement buyers. Its product catalogue supports chemistry, biology, physics, laboratory glassware supply, and education-focused scientific experimentation.

Frequently Asked Questions

What is an N4 Angled Cold Trap used for?

An N4 Angled Cold Trap is used to trap condensable vapours in compatible laboratory glassware, distillation, solvent-recovery, and vacuum-line assemblies.

What does 34/45 mean on this cold trap?

34/45 is the confirmed joint reference from the product name. The cold trap should be connected only to compatible 34/45 jointed laboratory glassware.

Is this cold trap made from borosilicate glass?

The supplied product name does not confirm the glass type. Add borosilicate, quartz, or other material claims only after verification.

Can this cold trap be used under vacuum?

Vacuum suitability is not confirmed. Use under vacuum only if the cold trap, joint, wall thickness, and complete apparatus are rated for that condition.

What coolant can be used with this cold trap?

Coolant compatibility is not confirmed. Use only a coolant that is approved for the verified glass type, trap design, and operating temperature range.

Does this product include clips or adapters?

The confirmed item is the N4 Angled Cold Trap 34/45. Clips, adapters, receiver flasks, connectors, and certificates should be listed only after verifying the supplied configuration.

For related cold-trap and laboratory glassware assembly support, explore laboratory glassware, glassware adapters, glass condenser products, and laboratory glass joints.