Oil for Rotary Vane Vacuum Pump One l Manufacturer,Supplier and Exporter in India

Product Code : SCL-PLE-10429

Oil for rotary vane vacuum pump 1 l is a maintenance consumable used to lubricate, seal and support smooth operation of compatible oil-sealed rotary vane vacuum pumps. It is intended for schools, colleges, science laboratories and institutional labs using rotary vane pumps for vacuum and pressure experiments.

Product Description

The Oil for Rotary Vane Vacuum Pump 1 l from Lab Glassware Manufacturer is supplied for routine maintenance of compatible rotary vane vacuum pumps used in laboratory vacuum applications. Clean pump oil helps the pump operate smoothly, supports sealing inside the pump mechanism and helps maintain consistent vacuum performance.

This product should be selected only after confirming compatibility with the specific pump model. Exact oil grade, viscosity, mineral or synthetic base, vapor pressure, chemical compatibility, flash point, safety data sheet and manufacturer approval should be confirmed before final catalogue publication or tender submission.

Key Features

• 1 l pack size for rotary vane vacuum pump maintenance.
• Used for compatible oil-sealed rotary vane vacuum pumps.
• Helps support lubrication, sealing and pump performance.
• Suitable for school, college and general laboratory vacuum setups.
• Useful for routine pump servicing and oil replacement schedules.
• Can support vacuum demonstrations when used with compatible pumps.
• Oil grade, viscosity and pump compatibility must be confirmed before use.

Technical Specifications

What's Included in the Kit

• Oil for rotary vane vacuum pump: 1 l
• Sealed container or bottle
• Safety data sheet
• Funnel or pouring accessory
• Instruction label or oil-change guide

Applications / Uses

• Routine oil replacement in compatible rotary vane vacuum pumps.
• Supporting laboratory vacuum-pump lubrication and sealing.
• Maintaining vacuum performance in school and college physics laboratories.
• Using with compatible Vacuum Experimental Pumping Stand.
• Supporting vacuum setups that include Duran Glass Vacuum Bell.
• Pairing with related exhaust protection such as Oil Mist Filter for Rotary Vane Vacuum Pump.

How to Use Oil for Rotary Vane Vacuum Pump 1 l

1. Switch off the rotary vane vacuum pump and disconnect it from the power supply.
2. Allow the pump to cool if it has been running.
3. Check the pump manual to confirm the approved oil type and fill volume.
4. Drain used oil into an approved waste container according to laboratory rules.
5. Close the drain plug securely after draining.
6. Add the new vacuum pump oil slowly through the oil-fill port.
7. Fill only to the manufacturer’s indicated level on the sight glass or oil mark.
8. Run the pump briefly and recheck the oil level after the oil circulates.

Safety note: Do not mix incompatible pump oils. Do not overfill the pump. Dispose of used pump oil as laboratory waste, especially if it may contain solvents, water or chemical vapors.

Care & Storage

• Keep the oil container sealed when not in use.
• Store in a cool, dry and ventilated location away from heat and direct sunlight.
• Prevent contamination by dust, water, solvents or other oils.
• Label opened containers with the opening date and intended pump model.
• Check oil appearance in the pump regularly and replace it if dark, cloudy, emulsified or contaminated.

Why Choose Lab Glassware Manufacturer

Lab Glassware Manufacturer supplies laboratory glassware, scientific laboratory instruments, lab experiment setups, science kits, mathematics kits, didactic models and STEM models. The brand supports schools, colleges, universities, distributors and export buyers with educational laboratory products. Its physics range includes vacuum and pressure products such as Air Pump Plate with Electrical Connections and Magdeburg Hemispheres for Student Experiments. Buyers should confirm oil grade, viscosity, SDS, shelf life and pump compatibility before bulk ordering.

Frequently Asked Questions

What is oil for rotary vane vacuum pump 1 l used for?

Oil for rotary vane vacuum pump 1 l is used to lubricate, seal and maintain compatible oil-sealed rotary vane vacuum pumps in laboratory vacuum applications.

What is the pack size?

The confirmed pack size is 1 l.

Can this oil be used in any rotary vane vacuum pump?

No. Use it only after confirming the approved oil grade and viscosity for the specific pump model.

When should vacuum pump oil be replaced?

Oil should be replaced according to the pump manual, or earlier if it becomes dirty, dark, cloudy, emulsified or contaminated by vapors.

Does this oil include an SDS or MSDS?

SDS or MSDS availability is not confirmed. Add safety-documentation details only after verifying the supplied product.

Can used vacuum pump oil be poured into a drain?

No. Used pump oil should be collected and disposed of according to laboratory waste-management rules, especially if contaminated by chemicals or solvents.

For more vacuum, pressure and pump-maintenance products, explore the Physics Lab Equipment category from Lab Glassware Manufacturer.

Recommended Product Image ALT Text

• Oil for rotary vane vacuum pump 1 l for laboratory pump maintenance
• 1 litre rotary vane vacuum pump oil for school physics lab equipment
• Vacuum pump maintenance oil for oil sealed rotary vane pump