Power supply unit 1-12 V / 6 A AC/DC Manufacturer,Supplier and Exporter in India

Product Code : SCL-EI-10549

The Power Supply Unit 1-12 V / 6 A AC/DC is a student laboratory power supply used for providing adjustable low-voltage AC and DC output in physics, electronics, and basic electrical circuit experiments. It is suitable for schools, colleges, STEM laboratories, electronics trainers, physics practical rooms, and student workbenches where controlled electrical power is required.

Product Description

The Power Supply Unit 1-12 V / 6 A AC/DC from Lab Glassware Manufacturer is intended for practical exercises involving lamps, motors, resistors, switches, electromagnets, coils, buzzers, meters, and basic electronic components. The 1–12 V output range allows students to test circuits at different low-voltage levels, while the 6 A current rating supports higher-current classroom loads when used within the confirmed safety limits.

This product should be described as a student laboratory AC/DC power supply only after the final electrical configuration is verified. Final details such as stepped or continuously variable output, AC output waveform, DC regulation, number of channels, terminal type, overload protection, short-circuit protection, fuse rating, display type, input voltage, insulation class, and certification must be confirmed before catalogue publication, quotation, or tender submission.

Key Features

• Low-voltage student power supply for school and college electrical experiments.
• Provides 1–12 V output range with 6 A current rating as specified.
• Supports AC and DC circuit exercises where final output configuration is confirmed.
• Useful for lamps, motors, switches, resistors, electromagnets, coils, and basic circuit boards.
• Suitable for Ohm’s law, series circuit, parallel circuit, resistance, current, and voltage activities.
• Can support safer classroom use when overload, fuse, and short-circuit protection are verified.
• Terminal type, display, input supply, and safety certification must be confirmed.

Technical Specifications

What's Included in the Kit

• Power supply unit 1-12 V / 6 A AC/DC
• Mains power cord or adapter 
• Output connecting leads, banana leads, or safety leads 
• Fuse, spare fuse, or protective accessory 
• User manual, student experiment guide, or teacher instruction sheet 
• Protective packing or storage box

Applications / Uses

• Providing low-voltage AC/DC power for student electrical circuit experiments.
• Running lamp, motor, buzzer, coil, electromagnet, and resistance demonstrations.
• Teaching voltage, current, resistance, Ohm’s law, power, and electrical measurement.
• Supporting series circuits, parallel circuits, bridge circuits, and basic electronics activities.
• Using with related products from Physics Lab Equipment.
• Supporting electronics practical rooms through General Lab Equipment.
• Requesting institutional or OEM supply through Tenders/OEM.
• Confirming electrical ratings and compliance through Contact Us.

How to Use the Power Supply Unit 1-12 V / 6 A AC/DC

1. Place the power supply on a dry, stable, insulated laboratory bench.
2. Confirm that the selected AC or DC output matches the student experiment.
3. Check the mains lead, output terminals, fuse, display, selector switch, and control knobs before use.
4. Set the output to the lowest voltage or zero setting before connecting the circuit.
5. Connect the student circuit using suitable insulated leads and correct polarity for DC circuits.
6. Select the required voltage between 1 V and 12 V according to the experiment.
7. Switch on the output and observe lamp brightness, motor speed, coil effect, or meter readings.
8. Switch off and disconnect the circuit before changing components, terminals, or AC/DC mode.

Safety note: Use only under teacher or technician supervision. Do not short the output terminals, exceed the 6 A rating, open the casing, use damaged leads, or connect circuits beyond the confirmed voltage and current limits.

Care & Maintenance

• Keep the power supply dry, ventilated, and free from dust, moisture, chemicals, and metal filings.
• Inspect mains cable, plug, output sockets, fuse holder, and leads before every practical session.
• Store output leads separately to prevent insulation damage and loose terminal contact.
• Replace fuses only with the confirmed fuse rating and type specified by the manufacturer.
• Have damaged units checked by a qualified technician before reuse.

Why Choose Lab Glassware Manufacturer

Lab Glassware Manufacturer supplies laboratory glassware, scientific laboratory instruments, lab experiment setups, science kits, mathematics kits, didactic models, and STEM models for educational and institutional buyers. The brand supports schools, colleges, universities, research laboratories, distributors, and export customers with physics, electronics, engineering, and general laboratory products. This Power Supply Unit 1-12 V / 6 A AC/DC can be supplied for student electrical exercises when final electrical specifications are verified. Buyers should confirm output configuration, protection features, terminal type, safety compliance, and documentation before procurement.

Frequently Asked Questions

What is the Power Supply Unit 1-12 V / 6 A AC/DC used for?

It is used to provide low-voltage AC and DC power for student experiments in electricity, electronics, motors, lamps, coils, resistors, electromagnets, and basic circuit work.

What is the output range of this power supply?

The stated output range is 1-12 V with a 6 A current rating. Confirm whether the voltage is stepped, continuously variable, separately available for AC and DC, or selectable by switch.

Can students use it for Ohm’s law experiments?

Yes, if the connected resistors, meters, and circuit components are rated for the selected voltage and current. Use suitable low-voltage settings and teacher supervision.

Does it provide both AC and DC output?

The product name specifies AC/DC, but the exact configuration must be confirmed. Verify whether it has separate AC and DC terminals, selectable output, or simultaneous outputs.

Is the power supply protected against short circuits?

Short-circuit protection is not confirmed. Add fuse, current limiting, overload protection, or thermal protection details only after checking the final datasheet.

What should be confirmed before ordering?

Confirm AC/DC output configuration, stepped or variable control, number of channels, terminal type, fuse rating, overload protection, short-circuit protection, display type, input voltage, plug type, safety certification, included leads, packing, and instruction guide availability.

For more power supplies, circuit kits, electronics trainers, and student physics equipment, explore Physics Lab Equipment from Lab Glassware Manufacturer.